Elektrisch insectenvanger Aura Black 22W

Insect-O-Cutor Elektrisch insectenvanger met lijmplaat

Prijszetting 20220407
186.82 *Prijzen zijn inclusief btw
ArtikelcodeZL051-BLACK-EU
Vervanglamptype:
Philips - 36 watt, 24" Shatterproof - TPX36-24S

Excalibur Aqua™ is speciaal ontwikkeld voor ruwe omgevingen en biedt een hoogwaardige oplossing voor insectenbestrijding waar IPX4-bescherming vereist is. Excalibur Aqua™ bevat hoogwaardige componenten en bouwkwaliteit en is gemaakt van 304-kwaliteit roestvrij staal en UV-stabiel polycarbonaat.

• IPX4 getest voor slangreiniging
• FEP-gecoate onbreekbare buizen voor gevaarlijke en gevoelige gebieden
• Betrouwbare 3750V-transformator met hoge specificaties
• Uv-buizen met hoge efficiëntie
• Sterk UV-stabiel polycarbonaat en 304-grade roestvrijstalen constructie
• Wand-, plafond- of bureaumontage
• Eenvoudig verwijderbaar groot dodrooster voor eenvoudige reiniging
• Onafhankelijk getest en gecertificeerd volgens RoHS en relevante Europese normen
• Buizen: 2 x TPX36-24s• Aanbevolen gebiedsdekking : 240m²

Let op: dit product wordt niet geleverd met een stekker en moet door een gekwalificeerde elektricien in een geschikte stroombron worden aangesloten
Please read these instructions carefully and store in a safe
place for future reference.
EXCALIBUR COMMERCIALAQUA™
As part of the Insect-O-Cutor® brand of insect control
products, Excalibur Commercial Aqua™
is an effective and
flexible professional flykiller which utilises highly effective UV
tubes. Constructed from stainless steel and UV stable
polycarbonate, Excalibur Commercial Aqua™
is designed for
damp and humid applications where splashing is likely, and
can be wall mounted, ceiling suspended or desk mounted.
Contents of package
- 1 x Excalibur Commercial Aqua™
flykiller
- 1 x Stripped mains cable (Type Z)
- 2 x High powered Shatterproof UV tubes (Fitted)
- 2 x Screws, wall plugs and suspension keyrings
WARNING - THIS APPLIANCE MUST BE EARTHED (CLASS 1)
INSECT CONTROL PRODUCTS
Excalibur Commercial Aqua™
utilises high powered ultra violet
tubes to attract flying insects and then electrocutes them on
a killing grid, before collecting them in a removable catch
tray.
WARNING
Excalibur Commercial Aqua™
is IPX4 rated and is designed for
use in applications appropriate to this ingress protection
rating.
Excalibur Commercial Aqua™
is not to be used by persons with
reduced physical, sensory or mental capabilities, or lack of
experience and training, unless they have been given
instruction.
Children should be supervised to ensure they do not play with
the appliance.
Excalibur Commercial Aqua™
must only be used in areas
which are free of dust and any possible explosive vapour
mixture, is suitable for indoor use only and is not suitable for
use in barns, stables and similar locations.
POSITIONING AND GUIDANCE FOR USE
Excalibur Commercial Aqua™
should ideally be fixed around
two meters above the ground, preferably in the darkest place
within the area to be protected. Do not position the unit close
to windows, skylights or other sources of light, or where it may
be obscured by furniture, doors or other obstacles.
Excalibur Commercial Aqua™
should ideally be in operation
for 24 hours a day, ensuring your premises are kept free of
flying insects. Insects are most attracted to Excalibur
Commercial Aqua™
units at night when there is no
competition from daylight or other light sources.
GUARANTEE
Excalibur Commercial Aqua™ has a three year guarantee and
if maintained as recommended in these instructions should
continue to work for many years.* Use of non-approved
consumables may invalidate the guarantee.
*Excludes tubes and starters. Does not cover breakdown due to misuse, incorrect operation
or use in an incorrect application.
INSTALLATION
INSTALLATION SHOULD BE CARRIED OUT BY SERVICE
PERSONNEL ONLY.
REMOVE THE CABLE TIES THAT SECURE THE KILLING GRID IN
POSITION BEFORE SWITCHING THE UNIT ON.
Excalibur Commercial Aqua™
should be mounted as shown in
the mounting options section of this document. Keep out of
reach of children. Use the stripped, fixed mains lead to hard
wire Excalibur Commercial Aqua™
to a power supply with an
appropriate IP protection for the application. The power
supply should be of an appropriate power rating, as specified
on the specification label found on the catch tray.
CLEANING
CLEANING SHOULD BE CARRIED OUT BY SERVICE PERSONNEL
ONLY, AFTER ENSURING THAT THE UNIT IS DISCONNECTED
FROM THE MAINS SUPPLY.
It is recommended that cleaning is carried out regularly every
month. During cleaning the unit should be thoroughly wiped
down with a damp cloth, removing any build up of dirt.
Ensure the unit is completely dry before reconnecting it to the
power supply.
Professional Electric Insect Control
Mounting Options
Wall
Desk
Suspended
(Chain not supplied)
MOUNTING FIXING CENTRES
METHOD 180w
Wall 600mm
Desk -
Suspended 680mm
SPECIFICATION / REPLACEMENT PARTS
Unit Excalibur Commercial Aqua 80
Voltage 230V ~ 50Hz
Dimensions(mm) 700 x 260 x 140
Coverage 220 Sq. Meters
Weight 6.5 Kg
Light Output 80W
Tubes 2 x TPX36-24S
Starter 2 x I154
CATCH TRAY REMOVAL
The catch tray is connected to the power supply of the unit via a hidden switch. By removing the catch tray, the connection
is broken and power is cut to the unit. This ensures safe access to the unit for servicing and cleaning.
NB - WHEN REPLACING THE CATCH TRAY BACK INTO EXCALIBUR COMMERCIALAQUA™
, ENSURE IT IS PUSHED FULLY INTO POSITION
AND THAT POWER IS RESTORED TO THE UNIT.
TUBE REPLACEMENT
TUBE REPLACEMENT SHOULD BE CARRIED OUT BY SERVICE PERSONNEL ONLY, AFTER ENSURING THAT THE UNIT IS DISCONNECTED
FROM THE MAINS SUPPLY.
To ensure the efficiency of Excalibur Commercial Aqua™
in catching flying insects, the UV tubes should be replaced annually.
After twelve months the phosphor coating that emits the correct wavelength of UV light has burnt away and the UV output is
diminished substantially.
To replace the UV tubes…
1. Remove the catch tray.
2. Remove the killing grid by first pushing it up, then pulling down.
3. Unscrew the IP rated tube holder caps at each end of the tube.
4. Pull the tube away from the chassis.
5. Dispose of the used UV tube in conjunction with local WEEE regulations.
STARTER REPLACEMENT
STARTER REPLACEMENT SHOULD BE CARRIED OUT BY SERVICE PERSONNEL ONLY, AFTER ENSURING THAT THE UNIT IS
DISCONNECTED FROM THE MAINS SUPPLY.
The starters provide an extra spark to initially light the UV tubes. Starters wear out and should be replaced at the same intervals
as the UV tubes.
To replace the starters…
1. Unscrew the IP rated starter cover.
2. Rotate the starter anti-clockwise.
3. Pull the starter free from the unit.